Title 40--Protection of Environment
CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)
PART 1065--ENGINE-TESTING PROCEDURES
|
 |
 | 1065.1 |
Applicability.
|
 |
 | 1065.2 |
Submitting information to EPA under this part. |
 |
 | 1065.5 |
Overview of this part 1065 and its relationship to the standard-setting part. |
 |
 | 1065.10 |
Other procedures. |
 |
 | 1065.12 |
Approval of alternate procedures. |
 |
 | 1065.15 |
Overview of procedures for laboratory and field testing. |
 |
 | 1065.20 |
Units of measure and overview of calculations. |
 |
 | 1065.25 |
Recordkeeping. |
 |
 | 1065.101 |
Overview. |
 |
 | 1065.110
|
Work inputs and outputs, accessory work, and operator demand. |
 |
 | 1065.120 |
Fuel properties and fuel temperature and pressure. |
 |
 | 1065.122 |
Engine cooling and lubrication. |
 |
 | 1065.125 |
Engine intake air. |
 |
 | 1065.127 |
Exhaust gas recirculation. |
 |
 | 1065.130 |
Engine exhaust. |
 |
 | 1065.140 |
Dilution for gaseous and PM constituents. |
 |
 | 1065.145 |
Gaseous and PM probes, transfer lines, and sampling system components. |
 |
 | 1065.150 |
Continuous sampling. |
 |
 | 1065.170 |
Batch sampling for gaseous and PM constituents. |
 |
 | 1065.190 |
PM-stabilization and weighing environments for gravimetric analysis. |
 |
 | 1065.195 |
PM-stabilization environment for in-situ analyzers. |
 |
 | 1065.201 |
Overview and general provisions. |
 |
 | 1065.202 |
Data updating, recording, and control. |
 |
 | 1065.205
|
Performance specifications for measurement instruments. |
 |
 | 1065.210 |
Work input and output sensors. |
 |
 | 1065.215 |
Pressure transducers, temperature sensors, and dewpoint sensors. |
 |
 | 1065.220 |
Fuel flow meter.
|
 |
 | 1065.225 |
Intake-air flow meter. |
 |
 | 1065.230 |
Raw exhaust flow meter. |
 |
 | 1065.240 |
Dilution air and diluted exhaust flow meters. |
 |
 | 1065.245 |
Sample flow meter for batch sampling. |
 |
 | 1065.248 |
Gas divider. |
 |
 | 1065.250 |
Nondispersive infra-red analyzer. |
 |
 | 1065.260 |
Flame-ionization detector. |
 |
 | 1065.265 |
Nonmethane cutter. |
 |
 | 1065.267 |
Gas chromatograph. |
 |
 | 1065.270 |
Chemiluminescent detector. |
 |
 | 1065.272 |
Nondispersive ultraviolet analyzer. |
 |
 | 1065.280 |
Paramagnetic and magnetopneumatic O&bdi2; detection analyzers.
|
 |
 | 1065.284 |
Zirconia (ZrO&bdi2;) analyzer. |
 |
 | 1065.290 |
PM gravimetric balance. |
 |
 | 1065.295 |
PM inertial balance for field-testing analysis. |
 |
 | 1065.301 |
Overview and general provisions.
|
 |
 | 1065.303 |
Summary of required calibration and verifications. |
 |
 | 1065.305 |
Verifications for accuracy, repeatability, and noise.
|
 |
 | 1065.307 |
Linearity verification. |
 |
 | 1065.308 |
Continuous gas analyzer system-response and updating-recording verification. |
 |
 | 1065.309 |
Continuous gas analyzer uniform response verification. |
 |
 | 1065.310 |
Torque calibration. |
 |
 | 1065.315 |
Pressure, temperature, and dewpoint calibration. |
 |
 | 1065.320 |
Fuel-flow calibration. |
 |
 | 1065.325 |
Intake-flow calibration. |
 |
 | 1065.330 |
Exhaust-flow calibration. |
 |
 | 1065.340 |
Diluted exhaust flow (CVS) calibration. |
 |
 | 1065.341 |
CVS and batch sampler verification (propane check). |
 |
 | 1065.345 |
Vacuum-side leak verification. |
 |
 | 1065.350 |
H&bdi2;O interference verification for CO&bdi2; NDIR analyzers. |
 |
 | 1065.355 |
H&bdi2;O and CO&bdi2; interference verification for CO NDIR analyzers. |
 |
 | 1065.360 |
FID optimization and verification. |
 |
 | 1065.362 |
Non-stoichiometric raw exhaust FID O&bdi2; interference verification. |
 |
 | 1065.365 |
Nonmethane cutter penetration fractions. |
 |
 | 1065.370 |
CLD CO&bdi2; and H&bdi2;O quench verification. |
 |
 | 1065.372 |
NDUV analyzer HC and H&bdi2;O interference verification.
|
 |
 | 1065.376 |
Chiller NO&bdi2; penetration. |
 |
 | 1065.378 |
NO&bdi2;-to-NO converter conversion verification. |
 |
 | 1065.390 |
PM balance verifications and weighing process verification. |
 |
 | 1065.395 |
Inertial PM balance verifications. |
 |
 | 1065.401 |
Test engine selection. |
 |
 | 1065.405 |
Test engine preparation and maintenance. |
 |
 | 1065.410 |
Maintenance limits for stabilized test engines. |
 |
 | 1065.415 |
Durability demonstration. |
 |
 | 1065.501 |
Overview. |
 |
 | 1065.510 |
Engine mapping. |
 |
 | 1065.512 |
Duty cycle generation.
|
 |
 | 1065.514 |
Cycle-validation criteria. |
 |
 | 1065.520 |
Pre-test verification procedures and pre-test data collection. |
 |
 | 1065.525 |
Engine starting, restarting, and shutdown. |
 |
 | 1065.530 |
Emission test sequence. |
 |
 | 1065.545 |
Validation of proportional flow control for batch sampling. |
 |
 | 1065.550 |
Gas analyzer range validation, drift validation, and drift correction. |
 |
 | 1065.590 |
PM sample preconditioning and tare weighing. |
 |
 | 1065.595 |
PM sample post-conditioning and total weighing. |
 |
 | 1065.601 |
Overview. |
 |
 | 1065.602 |
Statistics. |
 |
 | 1065.610 |
Duty cycle generation. |
 |
 | 1065.630 |
1980 international gravity formula. |
 |
 | 1065.640 |
Flow meter calibration calculations. |
 |
 | 1065.642 |
SSV, CFV, and PDP molar flow rate calculations. |
 |
 | 1065.645 |
Amount of water in an ideal gas. |
 |
 | 1065.650 |
Emission calculations. |
 |
 | 1065.655 |
Chemical balances of fuel, intake air, and exhaust. |
 |
 | 1065.659 |
Removed water correction. |
 |
 | 1065.660 |
THC and NMHC determination. |
 |
 | 1065.665 |
THCE and NMHCE determination. |
 |
 | 1065.667 |
Dilution air background emission correction. |
 |
 | 1065.670 |
NOX intake-air humidity and temperature corrections. |
 |
 | 1065.672 |
Drift correction. |
 |
 | 1065.675 |
CLD quench verification calculations. |
 |
 | 1065.690 |
Buoyancy correction for PM sample media. |
 |
 | 1065.695 |
Data requirements. |
 |
 | 1065.701 |
General requirements for test fuels. |
 |
 | 1065.703 |
Distillate diesel fuel. |
 |
 | 1065.710 |
Gasoline. |
 |
 | 1065.715 |
Natural gas. |
 |
 | 1065.720 |
Liquefied petroleum gas. |
 |
 | 1065.740 |
Lubricants. |
 |
 | 1065.745 |
Coolants. |
 |
 | 1065.750 |
Analytical gases. |
 |
 | 1065.790 |
Mass standards. |
 |
 | 1065.801 |
Applicability. |
 |
 | 1065.805 |
Sampling system. |
 |
 | 1065.845 |
Response factor determination. |
 |
 | 1065.850 |
Calculations. |
 |
 | 1065.901 |
Applicability. |
 |
 | 1065.905 |
General provisions. |
 |
 | 1065.910 |
PEMS auxiliary equipment for field testing. |
 |
 | 1065.915 |
PEMS instruments. |
 |
 | 1065.920 |
PEMS Calibrations and verifications. |
 |
 | 1065.925 |
PEMS preparation for field testing. |
 |
 | 1065.930 |
Engine starting, restarting, and shutdown. |
 |
 | 1065.935 |
Emission test sequence for field testing. |
 |
 | 1065.940 |
Emission calculations. |
 |
 | 1065.1001 |
Definitions. |
 |
 | 1065.1005 |
Symbols, abbreviations, acronyms, and units of measure. |
 |
 | 1065.1010 |
Reference materials. |