|
|
|
Title 49--Transportation
CHAPTER I--PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION
PART 178--SPECIFICATIONS FOR PACKAGINGS
|
|||
 |
 | 178.1 | Purpose and scope. |
|
|
| 178.2 | Applicability and responsibility. |
|
|
| 178.3 | Marking of packagings. |
|
|
| 178.33 | Specification 2P; inner nonrefillable metal receptacles. |
|
|
| 178.33-1 | Compliance. |
|
|
| 178.33-2 | Type and size. |
|
|
| 178.33-3 | Inspection. |
|
|
| 178.33-4 | Duties of inspector. |
|
|
| 178.33-5 | Material. |
|
|
| 178.33-6 | Manufacture. |
|
|
| 178.33-7 | Wall thickness. |
|
|
| 178.33-8 | Tests. |
|
|
| 178.33-9 | Marking. |
|
|
| 178.33a | Specification 2Q; inner nonrefillable metal receptacles. |
|
|
| 178.33a-1 | Compliance. |
|
|
| 178.33a-2 | Type and size. |
|
|
| 178.33a-3 | Inspection. |
|
|
| 178.33a-4 | Duties of inspector. |
|
|
| 178.33a-5 | Material. |
|
|
| 178.33a-6 | Manufacture. |
|
|
| 178.33a-7 | Wall thickness. |
|
|
| 178.33a-8 | Tests. |
|
|
| 178.33a-9 | Marking. |
|
|
| 178.35 | General requirements for specification cylinders. |
|
|
| 178.36 | Specification 3A and 3AX seamless steel cylinders. |
|
|
| 178.37 | Specification 3AA and 3AAX seamless steel cylinders. |
|
|
| 178.38 | Specification 3B seamless steel cylinders. |
|
|
| 178.39 | Specification 3BN seamless nickel cylinders. |
|
|
| 178.42 | Specification 3E seamless steel cylinders. |
|
|
| 178.44 | Specification 3HT seamless steel cylinders for aircraft use. |
|
|
| 178.45 | Specification 3T seamless steel cylinder. |
|
|
| 178.46 | Specification 3AL seamless aluminum cylinders. |
|
|
| 178.47 | Specification 4DS welded stainless steel cylinders for aircraft use. |
|
|
| 178.50 | Specification 4B welded or brazed steel cylinders. |
|
|
| 178.51 | Specification 4BA welded or brazed steel cylinders. |
|
|
| 178.53 | Specification 4D welded steel cylinders for aircraft use. |
|
|
| 178.55 | Specification 4B240ET welded or brazed cylinders. |
|
|
| 178.56 | Specification 4AA480 welded steel cylinders. |
|
|
| 178.57 | Specification 4L welded insulated cylinders. |
|
|
| 178.58 | Specification 4DA welded steel cylinders for aircraft use. |
|
|
| 178.59 | Specification 8 steel cylinders with porous fillings for acetylene. |
|
|
| 178.60 | Specification 8AL steel cylinders with porous fillings for acetylene. |
|
|
| 178.61 | Specification 4BW welded steel cylinders with electric-arc welded longitudinal seam. |
|
|
| 178.65 | Specification 39 non-reusable (non-refillable) cylinders. |
|
|
| 178.68 | Specification 4E welded aluminum cylinders. |
|
|
| 178.69 | Responsibilities and requirements for manufacturers of UN pressure receptacles. |
|
|
| 178.70 | Approval of UN pressure receptacles. |
|
|
| 178.71 | Specifications for UN pressure receptacles. |
|
|
| 178.74 | Approval of MEGCs. |
|
|
| 178.75 | Specifications for MEGCs. |
|
|
| 178.255 | Specification 60; steel portable tanks. |
|
|
| 178.255-1 | General requirements. |
|
|
| 178.255-2 | Material. |
|
|
| 178.255-3 | Expansion domes. |
|
|
| 178.255-4 | Closures for manholes and domes. |
|
|
| 178.255-5 | Bottom discharge outlets. |
|
|
| 178.255-6 | Loading and unloading accessories. |
|
|
| 178.255-7 | Protection of valves and accessories. |
|
|
| 178.255-8 | Safety devices. |
|
|
| 178.255-9 | Compartments. |
|
|
| 178.255-10 | Lining. |
|
|
| 178.255-11 | Tank mountings. |
|
|
| 178.255-12 | Pressure test. |
|
|
| 178.255-13 | Repair of tanks. |
|
|
| 178.255-14 | Marking. |
|
|
| 178.255-15 | Report. |
|
|
| 178.273 | Approval of Specification UN portable tanks. |
|
|
| 178.274 | Specifications for UN portable tanks. |
|
|
| 178.275 | Specification for UN Portable Tanks intended for the transportation of liquid and solid hazardous materials. |
|
|
| 178.276 | Requirements for the design, construction, inspection and testing of portable tanks intended for the transportation of non-refrigerated liquefied compressed gases. |
|
|
| 178.277 | Requirements for the design, construction, inspection and testing of portable tanks intended for the transportation of refrigerated liquefied gases. |
|
|
| 178.318 | Specification MC 201; container for detonators and percussion caps. |
|
|
| 178.318-1 | Scope. |
|
|
| 178.318-2 | Container. |
|
|
| 178.318-3 | Marking. |
|
|
| 178.320 | General requirements applicable to all DOT specification cargo tank motor vehicles. |
|
|
| 178.337 | Specification MC 331; cargo tank motor vehicle primarily for transportation of compressed gases as defined in subpart G of part 173 of this subchapter. |
|
|
| 178.337-1 | General requirements. |
|
|
| 178.337-2 | Material. |
|
|
| 178.337-3 | Structural integrity. |
|
|
| 178.337-4 | Joints. |
|
|
| 178.337-5 | Bulkheads, baffles and ring stiffeners. |
|
|
| 178.337-6 | Closure for manhole. |
|
|
| 178.337-7 | Overturn protection. |
|
|
| 178.337-8 | Openings, inlets, and outlets. |
|
|
| 178.337-9 | Pressure relief devices, piping, valves, hoses, and fittings. |
|
|
| 178.337-10 | Accident damage protection. |
|
|
| 178.337-11 | Emergency discharge control. |
|
|
| 178.337-13 | Supporting and anchoring. |
|
|
| 178.337-14 | Gauging devices. |
|
|
| 178.337-15 | Pumps and compressors. |
|
|
| 178.337-16 | Testing. |
|
|
| 178.337-17 | Marking. |
|
|
| 178.337-18 | Certification. |
|
|
| 178.338 | Specification MC-338; insulated cargo tank motor vehicle. |
|
|
| 178.338-1 | General requirements. |
|
|
| 178.338-2 | Material. |
|
|
| 178.338-3 | Structural integrity. |
|
|
| 178.338-4 | Joints. |
|
|
| 178.338-5 | Stiffening rings. |
|
|
| 178.338-6 | Manholes. |
|
|
| 178.338-7 | Openings. |
|
|
| 178.338-8 | Pressure relief devices, piping, valves, and fittings. |
|
|
| 178.338-9 | Holding time. |
|
|
| 178.338-10 | Accident damage protection. |
|
|
| 178.338-11 | Discharge control devices. |
|
|
| 178.338-12 | Shear section. |
|
|
| 178.338-13 | Supporting and anchoring. |
|
|
| 178.338-14 | Gauging devices. |
|
|
| 178.338-15 | Cleanliness. |
|
|
| 178.338-16 | Inspection and testing. |
|
|
| 178.338-17 | Pumps and compressors. |
|
|
| 178.338-18 | Marking. |
|
|
| 178.338-19 | Certification. |
|
|
| 178.345 | General design and construction requirements applicable to Specification DOT 406 (178.346), DOT 407 (178.347), and DOT 412 (178.348) cargo tank motor vehicles. |
|
|
| 178.345-1 | General requirements. |
|
|
| 178.345-2 | Material and material thickness. |
|
|
| 178.345-3 | Structural integrity. |
|
|
| 178.345-4 | Joints. |
|
|
| 178.345-5 | Manhole assemblies. |
|
|
| 178.345-6 | Supports and anchoring. |
|
|
| 178.345-7 | Circumferential reinforcements. |
|
|
| 178.345-8 | Accident damage protection. |
|
|
| 178.345-9 | Pumps, piping, hoses and connections. |
|
|
| 178.345-10 | Pressure relief. |
|
|
| 178.345-11 | Tank outlets. |
|
|
| 178.345-12 | Gauging devices. |
|
|
| 178.345-13 | Pressure and leakage tests. |
|
|
| 178.345-14 | Marking. |
|
|
| 178.345-15 | Certification. |
|
|
| 178.346 | Specification DOT 406; cargo tank motor vehicle. |
|
|
| 178.346-1 | General requirements. |
|
|
| 178.346-2 | Material and thickness of material. |
|
|
| 178.346-3 | Pressure relief. |
|
|
| 178.346-4 | Outlets. |
|
|
| 178.346-5 | Pressure and leakage tests. |
|
|
| 178.347 | Specification DOT 407; cargo tank motor vehicle. |
|
|
| 178.347-1 | General requirements. |
|
|
| 178.347-2 | Material and thickness of material. |
|
|
| 178.347-3 | Manhole assemblies. |
|
|
| 178.347-4 | Pressure relief. |
|
|
| 178.347-5 | Pressure and leakage test. |
|
|
| 178.348 | Specification DOT 412; cargo tank motor vehicle. |
|
|
| 178.348-1 | General requirements. |
|
|
| 178.348-2 | Material and thickness of material. |
|
|
| 178.348-3 | Pumps, piping, hoses and connections. |
|
|
| 178.348-4 | Pressure relief. |
|
|
| 178.348-5 | Pressure and leakage test. |
|
|
| 178.350 | Specification 7A; general packaging, Type A. |
|
|
| 178.356 | Specification 20PF phenolic-foam insulated, metal overpack. |
|
|
| 178.356-1 | General requirements. |
|
|
| 178.356-2 | Materials of construction and other requirements. |
|
|
| 178.356-3 | Tests. |
|
|
| 178.356-4 | Required markings. |
|
|
| 178.356-5 | Typical assembly detail. |
|
|
| 178.358 | Specification 21PF fire and shock resistant, phenolic-foam insulated, metal overpack. |
|
|
| 178.358-1 | General requirements. |
|
|
| 178.358-2 | Materials of construction and other requirements. |
|
|
| 178.358-3 | Modification of Specification 21PF-1 overpacks. |
|
|
| 178.358-4 | Construction of Specification 21PF-1B overpacks. |
|
|
| 178.358-5 | Required markings. |
|
|
| 178.358-6 | Typical assembly detail. |
|
|
| 178.360 | Specification 2R; inside containment vessel. |
|
|
| 178.360-1 | General requirements. |
|
|
| 178.360-2 | Manufacture. |
|
|
| 178.360-3 | Dimensions. |
|
|
| 178.360-4 | Closure devices. |
|
|
| 178.500 | Purpose, scope and definitions. |
|
|
| 178.502 | Identification codes for packagings. |
|
|
| 178.503 | Marking of packagings. |
|
|
| 178.504 | Standards for steel drums. |
|
|
| 178.505 | Standards for aluminum drums. |
|
|
| 178.506 | Standards for metal drums other than steel or aluminum. |
|
|
| 178.507 | Standards for plywood drums. |
|
|
| 178.508 | Standards for fiber drums. |
|
|
| 178.509 | Standards for plastic drums and jerricans. |
|
|
| 178.510 | Standards for wooden barrels. |
|
|
| 178.511 | Standards for aluminum and steel jerricans. |
|
|
| 178.512 | Standards for steel or aluminum boxes. |
|
|
| 178.513 | Standards for boxes of natural wood. |
|
|
| 178.514 | Standards for plywood boxes. |
|
|
| 178.515 | Standards for reconstituted wood boxes. |
|
|
| 178.516 | Standards for fiberboard boxes. |
|
|
| 178.517 | Standards for plastic boxes. |
|
|
| 178.518 | Standards for woven plastic bags. |
|
|
| 178.519 | Standards for plastic film bags. |
|
|
| 178.520 | Standards for textile bags. |
|
|
| 178.521 | Standards for paper bags. |
|
|
| 178.522 | Standards for composite packagings with inner plastic receptacles. |
|
|
| 178.523 | Standards for composite packagings with inner glass, porcelain, or stoneware receptacles. |
|
|
| 178.600 | Purpose and scope. |
|
|
| 178.601 | General requirements. |
|
|
| 178.602 | Preparation of packagings and packages for testing. |
|
|
| 178.603 | Drop test. |
|
|
| 178.604 | Leakproofness test. |
|
|
| 178.605 | Hydrostatic pressure test. |
|
|
| 178.606 | Stacking test. |
|
|
| 178.607 | Cooperage test for bung-type wooden barrels. |
|
|
| 178.608 | Vibration standard. |
|
|
| 178.609 | Test requirements for packagings for infectious substances. |
|
|
| 178.700 | Purpose, scope and definitions. |
|
|
| 178.702 | IBC codes. |
|
|
| 178.703 | Marking of IBCs. |
|
|
| 178.704 | General IBC standards. |
|
|
| 178.705 | Standards for metal IBCs. |
|
|
| 178.706 | Standards for rigid plastic IBCs. |
|
|
| 178.707 | Standards for composite IBCs. |
|
|
| 178.708 | Standards for fiberboard IBCs. |
|
|
| 178.709 | Standards for wooden IBCs. |
|
|
| 178.710 | Standards for flexible IBCs. |
|
|
| 178.800 | Purpose and scope. |
|
|
| 178.801 | General requirements. |
|
|
| 178.802 | Preparation of fiberboard IBCs for testing. |
|
|
| 178.803 | Testing and certification of IBCs. |
|
|
| 178.810 | Drop test. |
|
|
| 178.811 | Bottom lift test. |
|
|
| 178.812 | Top lift test. |
|
|
| 178.813 | Leakproofness test. |
|
|
| 178.814 | Hydrostatic pressure test. |
|
|
| 178.815 | Stacking test. |
|
|
| 178.816 | Topple test. |
|
|
| 178.817 | Righting test. |
|
|
| 178.818 | Tear test. |
|
|
| 178.819 | Vibration test. |
![[BACK ]](http://www.access.gpo.gov/su_docs/images/icons/lefticn2.gif){kind=icon}
![[BACK ]](http://www.access.gpo.gov/su_docs/images/icons/content.gif){kind=icon}