2008 CFR Title 29, Volume 5

Title 29--Labor CHAPTER XVII--OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR PART 1910--OCCUPATIONAL SAFETY AND HEALTH STANDARDS
	1910.1	Purpose and scope.
	1910.2	Definitions.
	1910.3	Petitions for the issuance, amendment, or repeal of a standard.
	1910.4	Amendments to this part.
	1910.5	Applicability of standards.
	1910.6	Incorporation by reference.
	1910.7	Definition and requirements for a nationally recognized testing laboratory.
	Appendix	Appendix A to § 1910.7--OSHA Recognition Process for Nationally Recognized Testing Laboratories.
	1910.8	OMB control numbers under the Paperwork Reduction Act.
	1910.11	Scope and purpose.
	1910.12	Construction work.
	1910.15	Shipyard employment.
	1910.16	Longshoring and marine terminals.
	1910.17	Effective dates.
	1910.18	Changes in established Federal standards.
	1910.19	Special provisions for air contaminants.
	1910.21	Definitions.
	1910.22	General requirements.
	1910.23	Guarding floor and wall openings and holes.
	1910.24	Fixed industrial stairs.
	1910.25	Portable wood ladders.
	1910.26	Portable metal ladders.
	1910.27	Fixed ladders.
	1910.28	Safety requirements for scaffolding.
	1910.29	Manually propelled mobile ladder stands and scaffolds (towers).
	1910.30	Other working surfaces.
	1910.33	Table of contents.
	1910.34	Coverage and definitions.
	1910.35	Compliance with NFPA 101-2000, Life Safety Code.
	1910.36	Design and construction requirements for exit routes.
	1910.37	Maintenance, safeguards, and operational features for exit routes.
	1910.38	Emergency action plans.
	1910.39	Fire prevention plans.
	Appendix	Appendix to Subpart E--Exit Routes, Emergency Action Plans, and Fire Prevention Plans.
	1910.66	Powered platforms for building maintenance.
	Appendix	Appendix A to § 1910.66--Guidelines (Advisory).
	Appendix	Appendix B to § 1910.66--Exhibits (Advisory).
	Appendix	Appendix C to § 1910.66--Persnall Fall Arrest System (Section I--Mandatory; Section II and III--Non-Mandatory).
	Appendix	Appendix D to § 1910.66--Existing Installations (Mandatory).
	1910.67	Vehicle-mounted elevating and rotating work platforms.
	1910.68	Manlifts.
	1910.94	Ventilation.
	1910.95	Occupational noise exposure.
	Appendix	Appendix A to § 1910.95--Noise Exposure Computation.
	Appendix	Appendix B to § 1910.95--Methods for Estimating the Adequacy of Hearing Protector Attenuation.
	Appendix	Appendix C to § 1910.95--Audiometric Measuring Instruments.
	Appendix	Appendix D to § 1910.95--Audiometric Test Rooms.
	Appendix	Appendix E to § 1910.95--Acoustic Calibration of Audiometers.
	Appendix	Appendix F to § 1910.95--Calculations and Application of Age Corrections to Audiograms.
	Appendix	Appendix G to § 1910.95--Monitoring Noise Levels Non-Mandatory Informational Appendix..
	Appendix	Appendix H to § 1910.95--Availability of Referenced Documents.
	Appendix	Appendix I to § 1910.95--Definitions.
	1910.97	Nonionizing radiation.
	1910.98	Effective dates.
	1910.101	Compressed gases (general requirements).
	1910.102	Acetylene.
	1910.103	Hydrogen.
	1910.104	Oxygen.
	1910.105	Nitrous oxide.
	1910.106	Flammable and combustible liquids.
	1910.107	Spray finishing using flammable and combustible materials.
	1910.109	Explosives and blasting agents.
	1910.110	Storage and handling of liquefied petroleum gases.
	1910.111	Storage and handling of anhydrous ammonia.
	1910.119	Process safety management of highly hazardous chemicals.
	Appendix	Appendix A to § 1910.119--List of Highly Hazardous Chemicals, Toxics and Reactives (Mandatory).
	Appendix	Appendix B to § 1910.119--Block Flow Diagram and Simplified Process Flow Diagram (Nonmandatory).
	Appendix	Appendix C to § 1910.119--Complinace Guidelines and Recommendations for Process Safety Management (Nonmandatory).
	Appendix	Appendix D to § 1910.119--Sources of Further Information (Nonmandatory).
	Appendix	Appendix E to § 1910.119--Personal Protective Equipment Test Methods (Nonmandatory).
	1910.120	Hazardous waste operations and emergency response.
	Appendix	Appendix A to § 1910.120--Personal Protective Equipment Test Methods.
	Appendix	Appendix B to § 1910.120--General Description and Discussion of the Levels of Protection and Protective Gear.
	Appendix	Appendix C to § 1910.120--Compliance Guidelines.
	Appendix	Appendix D to § 1910.120--Reference.
	Appendix	Appendix E to § 1910.120--Training Curiculum Guidelines.
	1910.122	Table of contents.
	1910.123	Dipping and coating operations: Coverage and definitions.
	1910.124	General requirements for dipping and coating operations.
	1910.125	Additional requirements for dipping and coating operations that use flammable or combustible liquids.
	1910.126	Additional requirements for special dipping and coating operations.
	1910.132	General requirements.
	1910.133	Eye and face protection.
	1910.134	Respiratory protection.
	Appendix	Appendix A to § 1910.134--Testing Procedures (Mandatory).
	Appendix	Appendix B-1 to § 1910.134--User Seal Check Prodecures (Mandatory).
	Appendix	Appendix B-2 to § 1910.134--Respirator Cleaning Procedures (Mandatory).
	Appendix	Appendix C to § 1910.134--OSHA Respirator Medical Evaluation Questionnaire (Mandatory).
	Appendix	Appendix D to § 1910.134--(Mandatory) Information for Employees Using Respirators When Not Required Under the Standard.
	1910.135	Head protection.
	1910.136	Foot protection.
	1910.137	Electrical protective equipment.
	1910.138	Hand protection.
	Appendix	Appendix A to Subpart I--References for Further Information (Non-Mandatory).
	Appendix	Appendix B to Subpart I--Non-Mandatory Compliance Guidelines for Hazard Assessment and Personal Protective Equipment Selection.
	1910.141	Sanitation.
	1910.142	Temporary labor camps.
	1910.144	Safety color code for marking physical hazards.
	1910.145	Specifications for accident prevention signs and tags.
	Appendix	Appendix A to § 1910.145(f)--Recommended Color Coding.
	Appendix	Appendix B to § 1910.145(f)--References for Further Information.
	1910.146	Permit-required confined spaces.
	Appendix	Appendix A to § 1910.146--Permit-required Confined Spaces.
	Appendix	Appendix B to § 1910.146--Procedures for Atmospheric Testing.
	Appendix	Appendix C to § 1910.146--Examples of Permit-required Confined Space Programs.
	Appendix	Appendix D to § 1910.146--Sample Permits.
	Appendix	Appendix E to § 1910.146--Sewer Systems Entry.
	Appendix	Appendix F to § 1910.146--Rescue Team or Rescue Service Evaluation Criteria (Non-Mandatory).
	1910.147	The control of hazardous energy (lockout/tagout).
	Appendix	Appendix A to § 1910.147--Typical Minimal Lockout Procedure.
	1910.151	Medical services and first aid.
	Appendix	Appendix A to § 1910.151--First Aid Kits (Non-Mandatory).
	1910.155	Scope, application and definitions applicable to this subpart.
	1910.156	Fire brigades.
	1910.157	Portable fire extinguishers.
	1910.158	Standpipe and hose systems.
	1910.159	Automatic sprinkler systems.
	1910.160	Fixed extinguishing systems, general.
	1910.161	Fixed extinguishing systems, dry chemical.
	1910.162	Fixed extinguishing systems, gaseous agent.
	1910.163	Fixed extinguishing systems, water spray and foam.
	1910.164	Fire detection systems.
	1910.165	Employee alarm systems.
	1910.169	Air receivers.
	1910.176	Handling materials--general.
	1910.177	Servicing multi-piece and single piece rim wheels.
	Appendix	Appendix A to § 1910.177--Trajectory Warning.
	Appendix	Appendix B to § 1910.177--Ordering Information for the OSHA Charts.
	1910.178	Powered industrial trucks.
	Appendix	Appendix A to § 1910.178--Stability of Powered Industrial Trucks (Non-mandatory Appendix to Paragraph (1) of This Section).
	1910.179	Overhead and gantry cranes.
	1910.180	Crawler locomotive and truck cranes.
	1910.181	Derricks.
	1910.183	Helicopters.
	1910.184	Slings.
	1910.211	Definitions.
	1910.212	General requirements for all machines.
	1910.213	Woodworking machinery requirements.
	1910.215	Abrasive wheel machinery.
	1910.216	Mills and calenders in the rubber and plastics industries.
	1910.217	Mechanical power presses.
	Appendix	Appendix A to § 1910.217--Mandatory Requirements for Certification/Validation of Safety Systems for Presence Sensing Device Initiation of Mechanical Power Presses.
	Appendix	Appendix B to § 1910.217--Nonmandatory Guidelines for Certification/Validation of Safety Systems for Presence Sensing Device Initiation of Mechanical Power Presses.
	Appendix	Appendix C to § 1910.217--Mandatory Requirements for OSHA Recognition of third-Party Validation Organizations for the PSDI Standard.
	Appendix	Appendix D to § 1910.217--Nonmandatory Supplementary Information.
	1910.218	Forging machines.
	1910.219	Mechanical power-transmission apparatus.
	1910.241	Definitions.
	1910.242	Hand and portable powered tools and equipment, general.
	1910.243	Guarding of portable powered tools.
	1910.244	Other portable tools and equipment.
	1910.251	Definitions.
	1910.252	General requirements.
	1910.253	Oxygen-fuel gas welding and cutting.
	1910.254	Arc welding and cutting.
	1910.255	Resistance welding.
	1910.261	Pulp, paper, and paperboard mills.
	1910.262	Textiles.
	1910.263	Bakery equipment.
	1910.264	Laundry machinery and operations.
	1910.265	Sawmills.
	1910.266	Logging operations.
	Appendix	Appendix A to § 1910.266--First-Aid Kits (Mandatory).
	Appendix	Appendix B to § 1910.266--First-aid and CPR Training (Mandatory).
	Appendix	Appendix C to § 1910.266--Comparable ISO Standards (Non-mandatory).
	1910.268	Telecommunications.
	1910.269	Electric power generation, transmission, and distribution.
	Appendix	Appendix A-1 to § 1910.269--Application of § 1910.269 and Subpart S of this Part to Electrical Installations.
	Appendix	Appendix A-2 to § 1910.269--Application of § 1910.269 and Subpart S of this Part to Electrical Safety-Related Work Practices.
	Appendix	Appendix A-3 to § 1910.269--Application of § 1910.269 and Subpart S of this Part to Tree-Trimming Operations.
	Appendix	Appendix A-4 to § 1910.269--Application of §§ 1910.147, 1910.269 and 1910.333 to Hazardous Energy Control Procedures (Lockout/Tagout).
	Appendix	Appendix A-5 to § 1910.269--Application of §§ 1910.146 and 1910.269 to Permit-Required Confied Spaces.
	Appendix	Appendix A to § 1910.269--Flow Charts.
	Appendix	Appendix B to § 1910.269--Working on Exposed Energized Parts.
	Appendix	Appendix C to § 1910.269--Protection from Step and Touch Potentials.
	Appendix	Appendix D to § 1910.269--Methods of Inspecting and Testing Wood Poles.
	Appendix	Appendix E to § 1910.269--Reference Documents.
	1910.272	Grain handling facilities.
	Appendix	Appendix A to § 1910.272--Grain Handling Facilities.
	Appendix	Appendix B to § 1910.272--Grain Handling Facilities National Consensus Standards.
	Appendix	Appendix C to § 1910.272--Grain Handling Facilities References for Further Information.
	1910.301	Introduction.
	1910.302	Electric utilization systems.
	1910.303	General.
	1910.304	Wiring design and protection.
	1910.305	Wiring methods, components, and equipment for general use.
	1910.306	Specific purpose equipment and installations.
	1910.307	Hazardous (classified) locations.
	1910.308	Special systems.
	1910.331	Scope.
	1910.332	Training.
	1910.333	Selection and use of work practices.
	1910.334	Use of equipment.
	1910.335	Safeguards for personnel protection.
	1910.399	Definitions applicable to this subpart.
	1910.401	Scope and application.
	1910.402	Definitions.
	1910.410	Qualifications of dive team.
	1910.420	Safe practices manual.
	1910.421	Pre-dive procedures.
	1910.422	Procedures during dive.
	1910.423	Post-dive procedures.
	1910.424	SCUBA diving.
	1910.425	Surface-supplied air diving.
	1910.426	Mixed-gas diving.
	1910.427	Liveboating.
	1910.430	Equipment.
	1910.440	Recordkeeping requirements.