1999 CFR Title 29, Volume 8

Title 30--Mineral Resources CHAPTER II--MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR PART 250--OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF
	250.100	Authority for information collection.
	250.101	Documents incorporated by reference.
	250.102	Definitions.
	250.103	Performance requirements.
	250.104	Jurisdiction.
	250.105	Functions.
	250.106	Oral approvals.
	250.107	Right of use and easement.
	250.108	Designation of operator.
	250.109	Local agent.
	250.110	Suspension of production or other operations.
	250.111	Determination of well producibility.
	250.112	Cancellation of leases.
	250.113	How does production, drilling, or well-reworking affect your lease term?
	250.114	Reinjection and subsurface storage of gas.
	250.115	Identification.
	250.116	Reimbursement.
	250.117	Information and forms.
	250.118	Data and information to be made available to the public.
	250.119	Accident reports.
	250.120	Safe and workmanlike operations.
	250.121	Access to facilities.
	250.122	Best available and safest technologies (BAST).
	250.123	Report of cessation of production.
	250.124	Appeals, general.
	250.125	Reports and investigations of apparent violations.
	250.126	Archaeological reports and surveys.
	250.200	General requirements.
	250.201	Preliminary activities.
	250.202	Well location and spacing.
	250.203	Exploration Plan.
	250.204	Development and Production Plan.
	250.300	Pollution prevention.
	250.301	Inspection of facilities.
	250.302	Definitions concerning air quality.
	250.303	Facilities described in a new or revised Exploration Plan or Development and Production Plan.
	250.304	Existing facilities.
	250.400	Control of wells.
	250.401	General requirements.
	250.402	Welding and burning practices and procedures.
	250.403	Electrical equipment.
	250.404	Well casing and cementing.
	250.405	Pressure testing of casing.
	250.406	Blowout preventer systems and system components.
	250.407	Blowout preventer (BOP) system tests, inspections, and maintenance.
	250.408	Well-control drills.
	250.409	Diverter systems.
	250.410	Mud program.
	250.411	Securing of wells.
	250.412	Field drilling rules.
	250.413	Supervision, surveillance, and training.
	250.414	Applications for permit to drill.
	250.415	Sundry notices and reports on wells.
	250.416	Well records.
	250.417	Hydrogen sulfide.
	250.500	General requirements.
	250.501	Definition.
	250.502	Equipment movement.
	250.503	Emergency shutdown system.
	250.504	Hydrogen sulfide.
	250.505	Subsea completions.
	250.506	Crew instructions.
	250.507	Welding and burning practices and procedures.
	250.508	Electrical requirements.
	250.509	Well-completion structures on fixed platforms.
	250.510	Diesel engine air intakes.
	250.511	Traveling-block safety device.
	250.512	Field well-completion rules.
	250.513	Approval and reporting of well-completion operations.
	250.514	Well-control fluids, equipment, and operations.
	250.515	Blowout prevention equipment.
	250.516	Blowout preventer system tests, inspections, and maintenance.
	250.517	Tubing and wellhead equipment.
	250.600	General requirements.
	250.601	Definitions.
	250.602	Equipment movement.
	250.603	Emergency shutdown system.
	250.604	Hydrogen sulfide.
	250.605	Subsea workovers.
	250.606	Crew instructions.
	250.607	Welding and burning practices and procedures.
	250.608	Electrical requirements.
	250.609	Well-workover structures on fixed platforms.
	250.610	Diesel engine air intakes.
	250.611	Traveling-block safety device.
	250.612	Field well-workover rules.
	250.613	Approval and reporting for well-workover operations.
	250.614	Well-control fluids, equipment, and operations.
	250.615	Blowout prevention equipment.
	250.616	Blowout preventer system testing, records, and drills.
	250.617	Tubing and wellhead equipment.
	250.618	Wireline operations.
	250.700	General requirements.
	250.701	Approvals.
	250.702	Permanent abandonment.
	250.703	Temporary abandonment.
	250.704	Site clearance verification.
	250.800	General requirements.
	250.801	Subsurface safety devices.
	250.802	Design, installation, and operation of surface production-safety systems.
	250.803	Additional production system requirements.
	250.804	Production safety-system testing and records.
	250.805	Safety device training.
	250.806	Safety and pollution prevention equipment quality assurance requirements.
	250.807	Hydrogen sulfide.
	250.900	General requirements.
	250.901	Application for approval.
	250.902	Platform Verification Program requirements.
	250.903	Certified Verification Agent duties and nomination.
	250.904	Environmental conditions.
	250.905	Loads.
	250.906	General design requirements.
	250.907	Steel platforms.
	250.908	Concrete-gravity platforms.
	250.909	Foundation.
	250.910	Marine operations.
	250.911	Inspection during construction.
	250.912	Periodic inspection and maintenance.
	250.913	Platform removal and location clearance.
	250.914	Records.
	250.1000	General requirements.
	250.1001	Definitions.
	250.1002	Design requirements for DOI pipelines.
	250.1003	Installation, testing, and repair requirements for DOI pipelines.
	250.1004	Safety equipment requirements for DOI pipelines.
	250.1005	Inspection requirements for DOI pipelines.
	250.1006	Abandonment and out-of-service requirements for DOI pipelines.
	250.1007	What to include in applications.
	250.1008	Reports.
	250.1009	General requirements for a pipeline right-of-way grant.
	250.1010	Applications for a pipeline right-of-way grant.
	250.1011	Granting a pipeline right-of-way.
	250.1012	Requirements for construction under a right-of-way grant.
	250.1013	Assignment of a right-of-way grant.
	250.1014	Relinquishment of a right-of-way grant.
	250.1100	Definitions for production rates.
	250.1101	General requirements and classification of reservoirs.
	250.1102	Oil and gas production rates.
	250.1103	Well production testing.
	250.1104	Bottomhole pressure survey.
	250.1105	Flaring or venting gas and burning liquid hydrocarbons.
	250.1106	Downhole commingling.
	250.1107	Enhanced oil and gas recovery operations.
	250.1200	Question index table.
	250.1201	Definitions.
	250.1202	Liquid hydrocarbon measurement.
	250.1203	Gas measurement.
	250.1204	Surface commingling.
	250.1205	Site security.
	250.1300	What is the purpose of this subpart?
	250.1301	What are the requirements for unitization?
	250.1302	What if I have a competitive reservoir on a lease?
	250.1303	How do I apply for voluntary unitization?
	250.1304	How will MMS require unitization?
	250.1400	How does MMS begin the civil penalty process?
	250.1401	Index table.
	250.1402	Definitions.
	250.1403	What is the maximum civil penalty?
	250.1404	Which violations will MMS review for potential civil penalties?
	250.1405	When is a case file developed?
	250.1406	When will MMS notify me and provide penalty information?
	250.1407	How do I respond to the letter of notification?
	250.1408	When will I be notified of the Reviewing Officer's decision?
	250.1409	What are my appeal rights?
	250.1500	Question index table.
	250.1501	Definitions.
	250.1502	What is MMS's goal for well control and production safety systems training?
	250.1503	What type of training must I provide for my employees?
	250.1504	What documentation must I provide to trainees?
	250.1505	How often must I provide training to my employees and for how many hours?
	250.1506	Where must I get training for my employees?
	250.1507	Where can I find training guidelines for other topics?
	250.1508	Can I get an exception to the training requirements?
	250.1509	Can my employees change job certification?
	250.1510	What must I do if I have temporary employees or on-the-job trainees?
	250.1511	What must manufacturer's representatives in production safety systems do?
	250.1512	May I use alternative training methods?
	250.1513	What is MMS looking for when it reviews an alternative training program?
	250.1514	Who may accredit training organizations to teach?
	250.1515	How long is a training organization's accreditation valid?
	250.1516	What information must a training organization submit to MMS?
	250.1517	What additional requirements must a training organization follow?
	250.1518	What are MMS's requirements for the written test?
	250.1519	What are MMS's requirements for the hands-on simulator and well test?
	250.1520	What elements must a basic course cover?
	250.1521	If MMS tests employees at my worksite, what must I do?
	250.1522	If MMS test trainees at a training organization's facility, what must occur?
	250.1523	Why might MMS conduct its own tests?
	250.1524	Can a training organization lose its accreditation?
	250.1600	Performance standard.
	250.1601	Definitions.
	250.1602	Applicability.
	250.1603	Determination of sulphur deposit.
	250.1604	General requirements.
	250.1605	Drilling requirements.
	250.1606	Control of wells.
	250.1607	Field rules.
	250.1608	Well casing and cementing.
	250.1609	Pressure testing of casing.
	250.1610	Blowout preventer systems and system components.
	250.1611	Blowout preventer systems tests, actuations, inspections, and maintenance.
	250.1612	Well-control drills.
	250.1613	Diverter systems.
	250.1614	Mud program.
	250.1615	Securing of wells.
	250.1616	Supervision, surveillance, and training.
	250.1617	Application for permit to drill.
	250.1618	Sundry notices and reports on wells.
	250.1619	Well records.
	250.1620	Well-completion and well-workover requirements.
	250.1621	Crew instructions.
	250.1622	Approvals and reporting of well-completion and well-workover operations.
	250.1623	Well-control fluids, equipment, and operations.
	250.1624	Blowout prevention equipment.
	250.1625	Blowout preventer system testing, records, and drills.
	250.1626	Tubing and wellhead equipment.
	250.1627	Production requirements.
	250.1628	Design, installation, and operation of production systems.
	250.1629	Additional production and fuel gas system requirements.
	250.1630	Safety-system testing and records.
	250.1631	Safety device training.
	250.1632	Production rates.
	250.1633	Production measurement.
	250.1634	Site security.